10 Patio Door Lock Repair-Related Meetups You Should Attend

Patio Door Lock Repairs

Over time, patio doors go through wear and tear that could result in lock malfunctions. Fortunately, there are several easy and efficient methods that can restore your uPVC patio door glass repair door's security.

Whether it's realigning the lock or cleaning the mechanism for locking These simple fixes can make your home more secure.

Clean the Lock

Patio doors are fantastic to let the outdoors in and keeping out the elements. However they could pose an issue for security if the lock doesn't work properly. Over time, wear and tear, cold and hot weather dirt and debris can cause your patio door lock to become difficult to operate. With some minor maintenance you can ensure that the locks on your patio door always work effectively.

It's essential to clean the lock on your patio door and all of its moving parts. This helps get rid of any grime and coatings that could hinder the lock from working in the way it should. Begin by wiping down the moving parts of the lock for your patio door using a damp cloth. then use a scouring pad or rough damp cloth to scrub any difficult-to-access areas of the door or frame that are coated with dirt. Then, wipe the lock down with a dry towel to get rid of any moisture. Let it air dry before using it.

If you have an exterior door that is fitted with a pin tumbler latch mechanism, you can grease the lock by applying powdered graphite to the key or using a Teflon-based lubricant such as WD-40 Multi-Use Product. This type of lubricant is able to be applied easily and doesn't dissolve over time. If you're unable find the right lubricant to use with your lock, make use of a pencil with a larger tip. Place the pencil into the lock, and shake it around to spread the graphite.

Regular maintenance is also required to keep the tracks of sliding patio door repair patio doors clear of dust, dirt and debris. These tracks are especially susceptible to ice and snow, which can cause them jam or bind which makes it difficult for your patio doors to open and close.

You can clean the track rails and rollers on sliding patio doors by removing damaged or dirty weather stripping. Clean it, and then replace it. The same is true for rollers on patio doors, which can be cleaned and sprayed with a non-stick lubricant in order to allow them to move freely.

Lubricate the moving parts

uPVC French Doors, like sliding patios, are operated with 3 to 4 or sometimes 5 point locking mechanisms. They include the handle and lock cylinder that is operated by the key. They also require maintenance, specifically lubrication on the moving parts. This can be accomplished with a thin oil however, never WD40. This should be done every year, at a minimum.

If hinges that are sagging aren't the cause, the door may be misaligned and catching or striking the strike plate hole in the frame. Take off the strike plate and employ a sharp tool to increase the size of its mortise. This allows the latch to sit perfectly in the hole, and also prevents getting caught or rubbing against the frame.

When the cylinder is out of the way, measure its width with the help of a book or piece wood that can fit into the gap of adjustment screw above the lock. The outer dimension is the distance from the outside of the door to the center of the cylinder. the inner dimension runs from the center of the adjustment screw to the end of the cylinder.

Verify the width of the lock.

If your patio door latch is difficult to turn even after cleaning and oiling it could be because it's not aligned with the strike plate. Examine if the door is in balance and whether the hinge screws are tight, but in many cases shifting the strike plate up or down can fix the issue.

Most of the time, the issue occurs when the strike of the lock is too small for the latch to properly engage. In this instance you'll have to increase the hole with the hammer or chisel and then test the latch to ensure that it contacts the strike plate without rubbing against or catching on the door's frame jamb.

You should identify the type mortise lock that you are using before you purchase an alternative. This can be done by looking at the end faceplate and determining if it is round or square. Take a look at each screw hole in the existing lock and note their dimensions. This information will allow you to locate a replacement lock that is the exact same width and fits into the hole that you already have.

In addition to identifying the mortise lock that is currently in use, you'll also need to check it for any bends or scratches that might require repair. A badly bent or damaged latch is more likely than one that's frequently used to break. Replace the lock if it shows indications of damage.

After you've examined the lock and identified which type of replacement you'll need now is the time to start working on the actual repair. The old spindle and handle should be removed from the doorway to the patio. Install the new handle. Start by installing the inside handle. Align it with the spindle and then secure it in position using two screws or bolts. Install the exterior handle after the interior handle. Once you have completed these steps, test the handles to make sure they are able to open and Patio Door Lock Repairs close easily and that the latch is in contact correctly with the strikeplate.

Make sure you check the Strike of the door.

The strike plate and the door latch are two components which work together to secure the door. If these parts aren't aligned correctly and the latch isn't latching the door Patio Door Lock Repairs shut correctly. Fortunately, this issue is often easy to fix.

First, check the strike plate's holes for receiving how to repair tilt and slide patio door ensure they are free of obstructions, such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate in position. This allows it to move vertically, but it will not be able to separate from the frame. Adjust the strike plate to align its holes for receiving with latch hooks of the door latch. After the strike plate is adjusted tighten all screws and test whether the door closes smoothly.

These plates are difficult to reach for homeowners with sliding patio doors. However, they are essential to lock and unlock your door. The metal plates are situated at the top and bottom jambs of your door, which are where they help support the latch. Then, the door latch slides into the strike plate to create a seal when closed. If the strike plate has been damaged or rusted, or if it is not installed correctly the latch may not be able to lock the door properly.

One of the most common reasons for a patio door lock to not close or not close is a misalignment of the latch and the strike plate. This can be verified using the "lipstick" test. Rub some lipstick on the outside of the deadbolt and then cover it with masking tape. The lipstick will leave an impression when you close the door. This will reveal exactly where the latch meets the strike plate. If the mark is too low or high you can easily adjust the strike plate.

If your patio door locks for sliding aren't working correctly they could be a problem in keeping your home safe from burglars. It is imperative to fix this problem as soon as possible. Follow these easy steps to repair your patio door lock and restore it's functionality.