Fitting Cat Flap In UPVC Door Panel

Cat flaps allow your pet come and go at their own pace without having to let him in or out. They also prevent your cat from peeing in the home.

It is simpler to install an animal flap on a Upvc panel than a glass one, but you will require some expertise and appropriate tools.

Take a measurement of the door

The installation of a cat flap inside the door can be a challenge but if you use the correct type of cat flap make sure you take your time and follow the steps provided it should not prove to be too difficult. We will be showing you how to draw the shape, then use the jigsaw to slice the door's opening and then complete the job by securing the cat flap to the door. This will ensure that the flap remains in place and shields the door from wind and rain causing damage.

The first thing to do is take a measurement of the width of your pet in order to get an accurate measurement of what size of cat flap you will need. This will enable you to choose a cat flap that is big enough to allow your pet to go into the house and exit without needing to open the door every time.

Once you have the measurements, you can determine the area on the door where the template should be positioned, typically this is done using an X, however some kits come with an illustration that outlines the location to drill, if yours does, then you can stick it to the door and use a pencil to draw around it. If your door has a moulding or Fitting Cat Flap In Upvc Door Panel sill on the bottom edge ensure you have clearance from these to keep your cat safe and prevent them gaining access to your home.

Put on your eye protection as well as a dust mask. Then using a jigsaw begin to cut along the line you have pencilled in, but don't push the blade too hard because this will cause it to cut more quickly than you want it to. If you have a set square then use it to ensure whether you're cutting in the right way and also to ensure that the hole is a good rectangular shape. Once you are happy with this you can start to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet in and out without having to worry about unwanted visitors or unwelcome gifts. It also prevents draughts, and helps to keep your home's temperature steady. The installation of a cat flap your door can be a daunting task to those who haven't tried it before. A lot of people will hire a professional carpenter or joiner to complete the job. This is an option but you can do it yourself, provided the tools are in order and the steps are adhered to.

While this is much easier to do when using a timber door it is still feasible in uPVC doors, but you need to be very careful not to scratch the doors since this could invalidate your warranty. First, you need to measure the door to make sure it will accommodate the new cat-flap. This should be easy enough if you are using a standard uPVC door, however you may require extra care if you are using an alternative kind of door, as they are more difficult to cut than solid uPVC panels.

Next, you will need to determine the height of your belly for your cat. This is the height between the floor and the underside of your cat's stomach. You will need to locate a space at the entrance that will allow your pet to move through easily. Once you have the information, you'll need to mark the area with a spirit level and a pencil so that you know the opening will fit your cat.

Once you have marked out the area, it is time to make the hole. It is important to be patient and use a jigsaw to ensure the cuts are smooth and clean, not rough and uneven. This could damage your door. Wear safety glasses and a dust mask when using the Jigsaw. Inhaling sawdust can be harmful for your health. After you have finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap can be easily inserted into the hole.

Cut a hole

The process of Fitting Cat Flap In Upvc Door Panel a cat flap into an existing door panel or double glazing sealed unit can be quite difficult. If you're not experienced in DIY, it is recommended to hire a professional to do the work for you. A faulty job can not only be ugly, but also pose an security risk. It could allow cold air to enter when the cat is outdoors and hot air to escape when it is inside.

The first thing to do is mark out the position of the hole in the door using pencil and a spirit level. This will ensure that it is correctly located and is in a straight line with other parts of the door. Make sure you have some sandpaper in your possession to smooth any rough edges.

Wear any safety equipment you'll need to use an electric tool. If you are worried about the sound of a jigsaw you can buy an electric version that is quieter and simpler to use.

You should only remove the material required to make the flap. It is important to leave some extra material for the wall thickness of the cat flap. However, removing too much can cause issues or even damage the frame of the door.

A door made of upvc could include a metal frame, or panel within it that could interfere with the microchip cat flap, and if this is the case, you'll need to make an oversize hole to ensure the metal does not come into contact with the the cat flap, if this is done it is crucial to fill in the oversize gap and make it watertight.

If you're planning to install a cat flap inside windows made of double-glazed or upvc with metal frames, you'll need to consult a specialist. They can provide you with a new piece of glass with the hole already pre-made for the cat flap. It will be much cheaper to do this than to attempt to fix the flap to an existing pane of glass that was not designed specifically for this purpose.

Fit the Flap

cat flap fitters near me flaps give your pet the freedom to come and go whenever they want and let them relax in the home whenever they want to. However, if you have a uPVC door, it may be difficult to put in a cat flap, especially in the absence of glass panes that can be cut to accommodate one. If you're willing to buy and install a new half-glazed uPVC panel then it is possible to fit a cat flap double glazing flap to the doors. It's not a simple matter of cutting holes in the door. You'll also have to do a few things to ensure that it is safe.

A composite, uPVC or GRP door panel is typically comprised of a plastic skin that is attached to an insulating polystyrene core. The material is quite fragile and care should be taken when cutting through it to avoid causing damage. This type of door typically includes a template that you can use as a reference to cut the hole in your door.

After you have carved out the hole in your front door, it is time to install the cat flap. You can buy and fit various models, from basic push-button operated models to microchip activated units that allow access only to your pet. Whatever kind of cat flap you pick it's essential that your cat is able to utilize the flap with ease without getting stuck outside in the rain.

It's a good idea choose circular fittings rather than one that is square, because circles are more securely cut into door glass. It's because square holes are more likely to crack the glass when they're drilled. This is also a safer choice since you don't have to drill into the toughened glass which could break and hurt your pet or family members. This is especially important if you have a young or elderly person in your home who could be hurt by shards of glass.