The 10 Most Scariest Things About Repairs To Upvc Windows

repairs to double glazing windows to upvc windows (use Admtmo)

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors repairs is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap between the window and the door is substantial, you may prefer a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time, they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can get at the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be put on. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double glazed repair-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to help you hold the frame up.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.

The problem can be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to offer advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash meets the frame. If they're beyond repair, it may be necessary to have them realigned. In addition, the interlock could be unbalanced. It is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.