Fitting Cat Flap In UPVC Door Panel

Cat flaps let your pet move around as they please, without you needing to let him in or out. They also help prevent your cat from toileting inside the house.

Installing a cat flap into the door panel made of upvc is a lot easier than glass doors, however it does require some skills and the right tools.

Take a look at the Door

Installing a cat door fitting cat Flap in upvc door Panel into a front door could be difficult, but provided that the cat flap is the appropriate one and you follow the directions it shouldn't be too difficult. We will help you mark the shape and use an jigsaw to cut out the door's opening. Then we'll complete the job by attaching the flap. This will ensure that the flap remains in place and protects the door from wind and rain damaging the door.

To determine the size of the cat flap you need, measure your pet's width. This will allow you to select a cat flap that is large enough to allow your pet to walk into the home and exit without having to open the door each time.

If your kit comes with an illustration of where to drill, you can put it on the door, and then draw a pencil around it. If your door has a sill or moulding at the bottom, make sure you leave enough space between your cat and these elements.

Then put on your eye protection and dust mask and using a jigsaw, begin cutting along the line that you've drawn in. Don't push the blade too hard, as this will make it cut faster than you want it to. Utilize a set square to ensure that you're cutting the material properly and that the cut is a rectangle shape. When you are happy with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap allows you to let your pet go inside and outside without having to worry about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature in your home steady. The installation of a cat flap your door may seem daunting to those who haven't tried it before. Many people call a professional carpenter or joiner to do the job. While this is definitely an option, it's possible to do the work yourself if you own the proper tools and follow instructions carefully.

This is much easier to do on wooden doors, but it is possible with uPVC. However it is important to be cautious not to harm the doors as this could invalidate your guarantee. The first step is to measure the door to ensure that it can accommodate the new cat-flap. This should be simple enough when you have a standard uPVC door, however you might need to take more care if you have an alternative type of door as these can be more difficult to cut into than solid uPVC panels.

The next step is to determine the height of your cat flap fitters's stomach. This is the amount of height between the floor and the underside of your cat's stomach. You'll need to locate a space on the door that will allow your pet to pass through comfortably. Once you know this you'll need to mark out the area using pencil and a spirit level to be certain that the hole you will create will fit your cat.

Once you've marked the area, you're now ready to cut the hole. It is essential to be patient and use a jigsaw to ensure the cuts are smooth and clean, not rough and uneven. This could damage your door. Wear safety glasses and a dust mask when working with a jigsaw. Inhaling sawdust can be harmful for your health. Once you've finished cutting the hole, you will need sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Make a hole

The process of fitting cat flap in upvc door panel (read more) a cat flap into an existing door panel or double glazing sealed unit can be difficult. If you're not proficient in DIY, it is recommended to hire a professional to do the job for you. A botched job could not only look ugly and unattractive, but could also be security risks. It could let cold air to enter when the cat is outdoors and hot air out when the cat is inside.

The first thing you need to do is mark out the location of the hole in the door with an eraser and an ax level. This will ensure that it is correctly placed and runs flush with all other parts of the door. It is important to have some sandpaper on the ready to smooth out any rough edges.

Wear any safety equipment you need to work with the power tool. If you are worried about the sound produced by a jigsaw you can buy a cordless version which is quieter and more user-friendly to use.

It is crucial to only remove the material needed to make the cat flap. A little bit of extra material is required to increase the thickness of the the cat flap itself but cutting off more than this could cause issues and cause damage to the door frame.

A back door with cat flap fitted made of upvc could have a metal frame or a panel inside that will interfere with the microchip cat flap in this case you will need to cut an oversize hole to ensure the metal doesn't touch the the cat flap. If this is the case, it is essential to fill in the gap and seal it with water.

If you want to install a cat flap into a double glazing cat flap-glazed or upvc window with frames made of metal you'll need to talk to an expert. They will provide you with a brand new piece of glass with the hole that is already designed for the cat flap. This is less expensive than trying to fit the flap into an existing pane of glass that was not designed for this purpose.

Fit the Flap

Cat flaps allow your pet the freedom to go and come whenever they want, allowing them to relax in the home whenever they like. If you have a uPVC front door, it can be difficult to install the cat flap. This is especially the case in the event that you don't own a glass panel that is cut. If you are willing to install a half-glazed uPVC replacement panel, it's possible to add a cat flap. It's not a simple matter of cutting an opening in the door. You'll also need to do a few things to ensure that it is secure.

A composite, uPVC or GRP door panel is typically composed of a thin plastic skin which is bonded to an insulating polystyrene base. The material is fairly fragile and care should be taken when cutting into it to avoid damaging. This kind of door typically includes a template that you can use as a reference to cut the hole into the door.

Once you've marked the hole in your front door, it is time to install the cat flap. You can buy and fit many different models that range from simple push-button operated ones to microchip activated units that allow access only to your pet. However, regardless of what type of cat flap you select, it's important to make sure that your cat can comfortably use the flap without becoming trapped in the weather.

It's a good idea opt for circular fittings rather than one that is square, because circles can be more securely cut into the door glass. It's because square holes are more likely to break the glass when drilled. It's also a safer option as you're not putting yourself at risk by drilling into toughened glass that might break and cause injury to your pet or family members. This is particularly crucial if you have children or elderly people in your home that could be hurt by glass shards.