Fitting A Cat Flap

It might seem daunting to install the flap for your cat, but with the right instructions, it's not too difficult. First, determine the height you want the flap to be (on average or belly height). Note this on your door and use the template included as a guide when drilling.

If you have a kitten that is still a newborn then gently prop the door slightly open and invite it to walk through. Reward it as it passes through.

Take a measurement of the door

A cat flap is an excellent method to let your pet come and go into and out of your home whenever it likes. This can help keep your cat healthy since it will ensure that it gets enough exercise and also be able to return inside if it is trapped in the elements during bad weather. It also can reduce the amount of time you have to allow it out or in and will also help ensure your home is secure by letting you be aware of when it went out.

However, it is essential that the flap for your cat is properly fitted to stop your pet from escaping through it or be pushed through by any other animals (e.g. dogs). It is important to measure your pet's belly height and the doorway to your home in order to ensure that the flap is at the right height. You can adjust the position of your flap if your cat is taller or less than the average.

Next, use a spirit-level to mark the center of the door. This is where you will install the flap. Then, using the mark as an indication, cut out the form of the flap on the door with a jigsaw. Once you've cut the area, sand the edges of the door to create smooth surfaces and drill any fixing holes needed.

Fitting a cat flap should not take more than two hours. However, the process could be a bit more difficult if you need to fit it into the door of a uPVC or composite door since these doors come with various thicknesses that can affect the way the holes are cut and the type of door they are fixed into. This is why we always recommend hiring an expert to do the work, particularly when you've never dealt with glass before.

Measure Your Cat

A cat flap will save you from listening to your pet meow for you to let it out or in. This is especially helpful if you are at work all day and your cat is inside waiting until you get home in any weather.

It is important to first measure your cat before you begin the installation. It might appear to be a simple task, but it's important to make sure you measure the right measurements. If not, your cat may find it difficult to use.

First of all, make sure that your cat is calm and not feeling stressed before you take the measurements. You'll need to keep them in a way that they cannot move and also make sure that the measuring tape or ruler is flat against their body, not arching in any places. Holding the measuring tape or ruler against their body from the top of their head to the base of their tail can allow you to make an precise measurement.

Once you've got the measurement of your cat, it's time to take a look at the door and decide where you want to place the flap. It is advisable to position the flap in the middle of your cat's belly because this will help them to move through it without too much effort. This will also stop the flap making a lot of noise as it opens and closes.

It is also important to consider the thickness and structure of the uPVC door or composite. While timber doors are of a similar thickness, uPVC and composite doors can be very different in their overall design and can make fitting the cat flap more difficult since you have to make sure that the hole you cut is the right size for your pet.

It is also worth reading through the directions that come with the kit to locate an illustration template that can be used to mark the location of the hole in the door. This will allow you to determine where the hole needs to be located and make sure that the template is set precisely on the door. Using a spirit-level to ensure that the template is sitting in a straight line against the door will also be very helpful.

Cut the Flap

Before you can put in your cat flap, you'll have to cut the door's panel to create a space large enough to accommodate it. This is a difficult task and it is recommended to get help from a professional cat flap fitting (click) service to complete this task if you don't have the knowledge or skills to tackle it yourself. It is also recommended to read the instructions included with the kit to discover how much to install a cat flap to do this correctly.

To do this, you will need to determine the height of your cat or kitten's belly and use this as an indicator point. A good rule of thumb is to put the window cat flap flap about 10-15 centimeters from the ground as this is roughly the average belly height for cats. Your cat will be able to move through the flap comfortably and will also make other cats or snooping neighbours a tough time trying to get in or out.

Mark the position of the cat flap on the door with a pencil. If your kit includes a template, place it over the door. Use the marks on the template to drill holes at each corner. Then, you should be able cut out the template and replace it with the flap for cats.

You can install the cat flap yourself in a wood or uPVC door If you're comfortable using the use of a Jigsaw. Ensure that you do not cut into any of the door's mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square depending on the way you want it. Be patient and don't try to force the jigsaw into cutting faster.

Once the hole is cut and the flap is firmly positioned, carefully place the flap of cat flap installation near me food into its new location and make sure that it is firmly fixed. If it has caps for screws, then put these caps onto the screws that protrude. Once the screws have been installed then sand the rough edges and seal any gaps. This will stop the entry of draughts into your home.

Place the Flap

If you have a basic cat flap, you can open it and encourage your pet to walk through by putting a small amount of cat food in the front of the door. You can also push the cat using a stick or your hand. Once your cat is accustomed to moving through the flap, it will be able to move into and out as it wishes, so you can let it out or in without having to be there keeping the door open for it throughout the day (and potentially in any weather).

It is possible to fit a cat flap in an UPVC door or glass door, but it may not be as easy as installing one inside a wooden exterior door. This is due to the fact that the doors made of UPVC and some kinds of glass doors do not have a uniform thickness. This could have a significant impact on the way you cut out the flap hole and also whether the flap fits correctly after installation.

Based on the type of cat flap you choose It could include a mounting kit and template that will tell precisely where to drill holes for cat Flap Fitting it. If the kit does not include an example you can copy it to create your own. When cutting, it is important to not push the jigsaw to the point that you create a larger hole than you need in your door.

Most cat flaps are square or rectangular in shape, however there are also some which are circular, and they are usually more difficult to fit. If you have a round flap, make sure that the hole is in the correct spot on your door. Otherwise, the cat may not be able to access it, and could be outside all day (or at night).

Certain cat flaps come with locks that let you determine when your cat is allowed to enter and leave. This is useful for pets who are afraid of going out in the dark, or coming back to the house at night. They can also be helpful if you work all day. Certain locks can be used for either entrance or exit, while others can be locked in both directions. This is useful for older cats or sick cats who aren't keen to venture out in cold weather.