Fitting A Cat Flap

It might seem daunting to install a cat flap however, with the proper guidelines, it's not all that difficult. Decide how high you'd like the flap to be (normally, it is at the belly height). Mark this point on the door and use the template provided as a reference to drill.

If you have a young kitten, prop the door open a bit and gradually allow it to go through. Reward the kitten each time it passes.

Take a measurement of the door

A cat flap is an excellent option to allow your pet to leave and come into and out of your home whenever it likes. This can keep your cat in good health as it will ensure that it gets enough exercise and be able to go back inside when it gets trapped outside during bad weather. This can reduce the time you have to let your cat out or in and make your home safer by notifying you when it's left.

However, it is important that the flap for your cat is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's stomach and the size of the doorway in your home to ensure the flap is at the proper height. You can alter the height of your flap if your cat is taller or smaller than the average.

The next step is to make use of a spirit level to mark the center of the door that you will install the flap. Then, using the markings as an outline, cut the contour of the flap on the door window with cat flap a Jigsaw. After you have cut the flap and sanded the edges to create smooth surfaces. Make any holes that are required.

The process of installing a cat flap insulation flap isn't as difficult as you may think, and it shouldn't take more than two hours for the entire task from start to finish. The process is slightly more difficult if you have to install it on the case of a uPVC door or a composite one. This is because composite doors are available in a variety of thicknesses, which can impact the way holes are cut. We always recommend to consult with an expert if this is your first experience with glass.

Measure Your Cat

A cat flap can spare you from hours of listening to your pet meow to let it in or out. This is particularly helpful for cats that are inside in all weathers when you are at work.

It is essential to first measure your cat before attempting to install. Although it might appear to be a simple operation it is important to make sure you measure correctly or your pet will find it difficult to use.

Firstly, make sure your cat is calm and not feeling stressed prior to taking the measurements. You will have to hold your cat in a place where they cannot move. Also, ensure that the measuring tape is flat and not curved against their body. Holding the measuring tape or ruler against their body from the top of their head to the bottom of their tail can allow you to get an accurate measurement.

Once you've figured out the measurements of your cat, it is time to take a look at the door and decide on where you want to place the flap. It is advisable to position the flap at the height of your cat's stomach as this will allow them to move through it with minimal effort. This will also prevent the flap from making too much noise as it swings back and back.

You should consider the thickness of the uPVC or composite door as well. While timber doors are of the same thickness, replacement upvc door panels with cat flap and composite doors are different in their overall design and this can make the installation of a cat flap more difficult because you must ensure that the hole you cut is the correct size for your pet.

You can also use the template drawing included in the instructions to mark the location of the hole on the door. This will allow you determine the location where the opening should be, and also to make sure the template is correctly positioned on the door. Utilizing a spirit level to ensure that the template is flush against the door can be very helpful.

Cut the Flap

You will need to cut a hole in the door panel to install your cat flap before you can put it in place. This is a difficult job and it is recommended that you get help from a professional cat flap fitting - check out this site, service for this step in case you don't have the skills or experience to complete the task yourself. You can also consult the instructions provided in the kit to find out how to do it properly.

To do this, you will need to take a measurement of the height of your cat's or kitten's belly. Use this as an indicator point. As a general rule you should place the flap approximately 10-15 centimeters above the ground. This is the average height of the stomach for cats. This way, your cat can move through the flap without difficulty and also give the other cats or neighbours who are snooping a tough time trying to leave or enter.

The position of the cat flap on the door with the pencil. If your kit comes with an outline of paper, place this over the door and use the marks to drill holes in every corner of the template. Then, you'll be able to cut the template and replace it with the cat flap.

You can install the cat flap yourself on the door made of wood or upvc door panel with cat flap If you're comfortable with the use of a Jigsaw. Ensure that you do not cut into any of the door's mullions or vertical rails. You can use a jigsaw cut the panel into a square or a circle, depending on the design of your cat flap. Take your time, and don't make the jigsaw cut faster.

Once the hole is cut then carefully insert the cat flap into its new home and make sure that it is securely secured. If it has screw caps, then push these onto the protruding screws. Once the screws are in place, sand any rough edges of the cut, cat flap Fitting and then seal any gaps to ensure that there are no draughts coming into your home.

Place the Flap

If you have a standard cat flap, you can encourage your pet to go through it by placing a small amount of cat food on the top of the door. Alternatively you can try pushing the cat through using your hands or a stick. Once your pet has become accustomed to walking through the flap it will be able to come and go whenever it wants. This allows you to let it in and out whenever it wishes.

You can fit the flap onto the UPVC or glass doors however it's not exactly the same as fitting it into a wooden external door because UPVC and some glass doors don't have the same thickness. This could affect the way you cut the hole for the flap, and can also affect whether your flap is fitted correctly after it has been installed.

Depending on the type of cat flap you choose It could be equipped with a mounting kit and a template that will tell precisely where to drill the holes for it. If the kit does not include an example, you can photocopy it to make your own. It's important not to use the jigsaw to in order to cut, so it doesn't make a larger than needed hole in your door.

Certain cat flaps come in circular shapes, which can be more difficult to put in. If you have a circular flap, it's essential to make sure the hole is in the right position on your door, because in the event that it's not, the cat won't be able to use it and may be stuck out in the sun all day (or even at night).

Some models of cat flap have locks that allow you to manage when your cat comes in and goes. These can be very useful if you're worried about your cat going out at night and then coming back in the darkness, or if you're at work for the entire day. Certain locks can be used for entry or exit, and others can be locked both ways. This is helpful for sick or older cats who do not want to venture out in cold weather.